MPX4100A vs MPX4115A117 Vergleich
Detaillierter Direktvergleich von MPX4100A von NXP Semiconductors und MPX4115A117 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX4100A | MPX4115A117 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,85 | $10,90 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 105 kPa (2.9 PSI to 15.23 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Ausgangstyp | Analog Voltage | Analog, Ratiometric Voltage |
| Ausgangsspannungsbereich | 0.3 V to 4.9 V | 0.2 V to 4.8 V |
| Supply Voltage Range | 4.85 V to 5.35 V | — |
| Sensitivity | 54 mV/kPa (typical) | — |
| Full-Scale Output (Nominal) | 4.9 V at 105 kPa | — |
| Accuracy | ±1.8% | ±1.5% over 0°C to 85°C |
| Versorgungsstrom | [DATA_NEEDED: typical supply current in mA] | [DATA_NEEDED: supply current] |
| Betriebstemperaturbereich | -40C to +125C | — |
| Port Type | Single axial port (no hose barb on basic element) | Single axial port, top side |
| Gehäuse / Bauform | 6-SIP Module (through-hole) | 6-SIP Module (Case 867-08) |
| Montageart | Through Hole | Through-Hole |
| Output Response Time | [DATA_NEEDED: response time in ms] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Output Ratiometric to Vcc | Yes | — |
| Versorgungsspannung | — | 4.85 V to 5.35 V (5 V typ) |
| Betriebstemperatur | — | -40 °C to +125 °C |
| Response Time | — | 1.0 ms (typical) |
| Media Compatibility | — | Dry air, non-corrosive gases |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film network |
| Pin-Anzahl | — | 6 |