MPX4115A117 vs MPX4100A Vergleich
Detaillierter Direktvergleich von MPX4115A117 von NXP Semiconductors und MPX4100A von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX4115A117 | MPX4100A |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,90 | $10,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 20 kPa to 105 kPa (2.9 PSI to 15.23 PSI) |
| Ausgangstyp | Analog, Ratiometric Voltage | Analog Voltage |
| Ausgangsspannungsbereich | 0.2 V to 4.8 V | 0.3 V to 4.9 V |
| Versorgungsspannung | 4.85 V to 5.35 V (5 V typ) | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical supply current in mA] |
| Accuracy | ±1.5% over 0°C to 85°C | ±1.8% |
| Betriebstemperatur | -40 °C to +125 °C | — |
| Response Time | 1.0 ms (typical) | — |
| Gehäuse / Bauform | 6-SIP Module (Case 867-08) | 6-SIP Module (through-hole) |
| Port Type | Single axial port, top side | Single axial port (no hose barb on basic element) |
| Montageart | Through-Hole | Through Hole |
| Media Compatibility | Dry air, non-corrosive gases | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| Pin-Anzahl | 6 | — |
| Supply Voltage Range | — | 4.85 V to 5.35 V |
| Sensitivity | — | 54 mV/kPa (typical) |
| Full-Scale Output (Nominal) | — | 4.9 V at 105 kPa |
| Betriebstemperaturbereich | — | -40C to +125C |
| Output Response Time | — | [DATA_NEEDED: response time in ms] |
| Output Ratiometric to Vcc | — | Yes |