MPX4200A vs MPX4115A Vergleich
Detaillierter Direktvergleich von MPX4200A von NXP Semiconductors und MPX4115A von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX4200A | MPX4115A |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,45 | $8,20 |
| Pressure Type | Absolute (Manifold Absolute Pressure) | — |
| Operating Pressure Range | 20 kPa to 200 kPa (2.9 PSI to 29.01 PSI) | — |
| Ausgangstyp | Analog voltage (ratiometric) | Analog Voltage |
| Ausgangsspannungsbereich | 0.3 V to 4.9 V | 0.2 V to 4.8 V |
| Full-Scale Output (200 kPa) | 4.65 V typical at VCC = 5.1 V | — |
| Supply Voltage (VCC) | 5.1 V nominal (4.85 V to 5.35 V operating) | — |
| Versorgungsstrom | 10 mA typical | — |
| Pressure Error (0 °C to 85 °C) | 1.5 % maximum (full-scale) | — |
| Betriebstemperatur | -40 °C to +125 °C | -40°C to +125°C |
| Storage Temperature | -40 °C to +125 °C | — |
| Gehäuse / Bauform | 6-SIP Module (through-hole) | — |
| Port Type | Integrated axial pressure port | Single port, axial |
| Montageart | Through Hole | Through-Hole |
| RoHS-Status | Compliant | Compliant |
| Signal Conditioning | On-chip, temperature compensated, calibrated | On-chip bipolar op-amp + thin-film resistor network |
| Sensortyp | — | Absolute Pressure Sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Versorgungsspannung | — | 5.1 V typical |
| Accuracy | — | ±1.5% (0°C to +85°C) |
| Gehäuse | — | 6-SIP Module (Unibody) |
| Media Compatibility | — | Dry air (non-corrosive gas) |
| Calibration | — | Factory calibrated, no external compensation required |
| MSL-Level | — | 1 |