MPX5100AP vs MPX5100DP Vergleich

Detaillierter Direktvergleich von MPX5100AP von NXP Semiconductors und MPX5100DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
MPX5100AP MPX5100AP - 0-100kPa Absolute Pressure Sensor, 6-SIP | NXP

MPX5100AP - 0-100kPa Absolute Pressure Sensor, 6-SIP | NXP

MPX5100AP ✓ Aktiv

Spezifikationsvergleich

Parameter MPX5100AP MPX5100DP
Marke NXP Semiconductors NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $12,03 $12,03
Pressure Type Absolute Differential
Operating Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) 0 kPa to 100 kPa (0 to 14.5 PSI)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] [DATA_NEEDED: maximum overload pressure]
Output Voltage Span 0.2 V to 4.7 V at VCC = 5.0 V —
Supply Voltage (VCC) 5.0 V typical (4.75 V to 5.25 V) —
Versorgungsstrom 10 mA typical —
Pressure Accuracy +/- 2.5% (0 C to 85 C) —
Temperature Compensated Range 0 C to +85 C —
Betriebstemperaturbereich -40 C to +125 C —
Response Time 1 ms typical —
Ausgangstyp Analog, ratiometric Analog, ratiometric to Vcc
Port Style Axial port with 0.19 in (4.93 mm) tube —
Gehäuse 6-SIP Module (Case 867B-04) 6-SIP Module (through-hole)
Montageart Through-Hole (SIP) Through-Hole (SIP)
Technology Piezoresistive MEMS with bipolar ASIC Piezoresistive MEMS with bipolar ASIC
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance status]
Supply Voltage (Vcc) — 5 V (nominal)
Ausgangsspannungsbereich — 0.2 V to 4.7 V (ratiometric, ~4.5 V span)
Accuracy — ±2.5% (0 to 85 °C)
Sensitivity — 45 mV/kPa nominal
Betriebstemperatur — -40 °C to +125 °C
Response Bandwidth — 1 kHz (typical)
Port Configuration — Dual ports, male 0.19" (4.93 mm) tube, same side
Signal Conditioning — On-chip amplifier, temperature compensation, calibration
Lead-Free — [DATA_NEEDED: lead-free status]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern