MPXA6115A6U vs MPXH6115A6U Vergleich
Detaillierter Direktvergleich von MPXA6115A6U von NXP Semiconductors und MPXH6115A6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXH6115A6U - 15-115 kPa Absolute Pressure Sensor, SOIC-8 | NXP
MPXH6115A6U ✓ AktivSpezifikationsvergleich
| Parameter | MPXA6115A6U | MPXH6115A6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,80 | $9,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Ausgangstyp | Analog Voltage | Analog, ratiometric to VCC |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Accuracy | +/-1.5% | — |
| Betriebstemperatur | -40C to +125C | -40C to +125C |
| Gehäuse | 8-SMD Module (SOP 8) | 8-SOIC (0.295", 7.50 mm width) with top-side pressure port |
| Port Type | Single axial port (top) | — |
| Montageart | Surface Mount | Surface Mount |
| Sensor Technology | Piezoresistive (silicon MEMS) | — |
| Signal Conditioning | On-chip bipolar op-amp with thin-film resistors | — |
| Temperature Compensation | Yes, on-chip calibrated | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance] |
| Part Status | Active | — |
| Maximum Over-Pressure | — | 400 kPa |
| Sensitivity | — | 45.9 mV/kPa (typical) |
| Accuracy (0C to 85C) | — | 1.5 % (max) |
| Versorgungsstrom | — | 6 mA (typical) |
| Compensated Temperature | — | 0C to +85C |
| Pressure Port | — | Vertical/Horizontal axial port (case variant 6) |
| Media Compatibility | — | Dry air, non-corrosive gases only |