MPXA6115AC6U vs MPXAZ6115APT1 Vergleich
Detaillierter Direktvergleich von MPXA6115AC6U von NXP Semiconductors und MPXAZ6115APT1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXA6115AC6U | MPXAZ6115APT1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,95 | $8,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Maximum Over Pressure | [DATA_NEEDED: maximum over pressure rating] | — |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V (at 5 V supply) | 0.2 V to 4.7 V |
| Sensitivity | 45.9 mV/kPa (typical) | [DATA_NEEDED: V/kPa or mV/kPa] |
| Versorgungsspannung | 4.75 V to 5.25 V | 4.75 V to 5.25 V (5 V nominal) |
| Versorgungsstrom | [DATA_NEEDED: supply current typical] | — |
| Accuracy | ±1.5% (0°C to +85°C) | — |
| Betriebstemperatur | -40°C to +125°C | -40 C to +125 C |
| Response Time | 1.0 ms (typical) | [DATA_NEEDED: response time ms] |
| Port Style | Single axial top port, 0.13" (3.17 mm) tube | Male 0.13 inch (3.17 mm) tube, side port |
| Gehäuse | 8-SMD, Gull Wing (Case 1320-02, SOP-8) | 8-SMD, Gull Wing |
| Montageart | Surface Mount | Surface Mount |
| Ausgangstyp | Analog, ratiometric | Analog, ratiometric |
| Signal Conditioning | On-chip bipolar op-amp, temperature compensated | On-chip, temperature compensated and calibrated |
| Element Type | Piezoresistive MEMS silicon | — |
| RoHS-Status | Compliant | Compliant |
| Media Compatibility | — | Media resistant (non-corrosive gases) |
| Accuracy (typ) | — | [DATA_NEEDED: accuracy %FS] |
| Current Consumption | — | [DATA_NEEDED: supply current mA] |
| Bridge Type | — | On-chip silicon strain-gauge (piezo-resistive) |