MPXAZ6115A7U vs MPXAZ4115A6U Vergleich
Detaillierter Direktvergleich von MPXAZ6115A7U von NXP Semiconductors und MPXAZ4115A6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXAZ6115A7U | MPXAZ4115A6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,10 | $7,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Ausgangstyp | Analog Voltage | Analog (calibrated, ratiometric) |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.8 V |
| Versorgungsspannung | 5.0 V typical | — |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | 46.4 mV/kPa (nominal) |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | +/-1.5% over 0C to +85C (typical) |
| Betriebstemperatur | -40C to +125C | — |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | — |
| Gehäuse / Bauform | 8-DIP Module (0.560 inch, 14.22 mm) | 8-SMD Gull Wing module |
| Montageart | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, factory calibrated | — |
| RoHS-Status | Compliant | Compliant |
| Supply Voltage Range | — | 4.85 V to 5.35 V |
| Betriebstemperaturbereich | — | -40C to +125C |
| Port Type | — | Media-resistant axial port |
| Media Resistant | — | Yes (humid and mild contaminants) |
| Integrated Signal Conditioning | — | Yes (on-chip amplifier, temperature compensation, calibration) |
| Off-Chip Calibration Required | — | No (factory trimmed) |
| Lead Free | — | Yes |