MPXAZ6115A7U vs MPXAZ6115A6U Vergleich
Detaillierter Direktvergleich von MPXAZ6115A7U von NXP Semiconductors und MPXAZ6115A6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXAZ6115A7U | MPXAZ6115A6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,10 | $9,85 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Ausgangstyp | Analog Voltage | Analog Voltage |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 5.0 V typical | 5 V typical (ratiometric output) |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | — |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | ±1.5% |
| Betriebstemperatur | -40C to +125C | — |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | No Port (axial side-mount package) |
| Gehäuse / Bauform | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Montageart | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip, temperature compensated, calibrated |
| Temperature Compensation | On-chip, factory calibrated | — |
| RoHS-Status | Compliant | Compliant |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Betriebstemperaturbereich | — | -40C to +125C |
| Media Resistance | — | Yes (gel-protected, Z-suffix) |
| Gehäuse | — | 8-SMD Module, axial port |
| Sensor Technology | — | Piezoresistive MEMS |
| Reach Status | — | Compliant |