MPXAZ6115AP vs MPXAZ6115A7U Vergleich
Detaillierter Direktvergleich von MPXAZ6115AP von NXP Semiconductors und MPXAZ6115A7U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPXAZ6115AP - 15-115 kPa Absolute Pressure Sensor, Side Port | NXP
MPXAZ6115AP ✓ Aktiv
Spezifikationsvergleich
| Parameter | MPXAZ6115AP | MPXAZ6115A7U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,30 | $10,10 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Ausgangstyp | Analog Voltage | Analog Voltage |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 4.75 V to 5.25 V (5 V nominal) | 5.0 V typical |
| Accuracy | +/-1.5% | ±1.5% (0C to 85C, after NXP factory calibration) |
| Betriebstemperatur | -40 C to +125 C | -40C to +125C |
| Gehäuse | 8-SMD, Gull Wing, Side Port (SOP-8) | — |
| Port Style | Male 0.13 in (3.17 mm) tube, side-mounted | Top axial tube, 0.13" (3.17 mm) diameter |
| Technology | Piezoresistive silicon, monolithic with on-chip bipolar op-amp | — |
| Temperature Compensation | On-chip, -40 C to +125 C | On-chip, factory calibrated |
| Montageart | Surface Mount | Through-Hole |
| RoHS-Status | Compliant | Compliant |
| Port Material | PPS thermoplastic (media resistant) | — |
| Operating Pressure Min | — | 15 kPa |
| Operating Pressure Max | — | 115 kPa |
| Sensitivity | — | [DATA_NEEDED: typical sensitivity mV/kPa] |
| Gehäuse / Bauform | — | 8-DIP Module (0.560 inch, 14.22 mm) |
| Media Compatibility | — | Non-corrosive dry gases (media resistant) |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film resistor network |