MPXAZ6115APT1 vs MPXA6115A6U Vergleich
Detaillierter Direktvergleich von MPXAZ6115APT1 von NXP Semiconductors und MPXA6115A6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXAZ6115APT1 | MPXA6115A6U |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,95 | $10,80 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V | 0.2 V to 4.7 V |
| Versorgungsspannung | 4.75 V to 5.25 V (5 V nominal) | 4.75 V to 5.25 V |
| Ausgangstyp | Analog, ratiometric | Analog Voltage |
| Port Style | Male 0.13 inch (3.17 mm) tube, side port | — |
| Gehäuse | 8-SMD, Gull Wing | 8-SMD Module (SOP 8) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 C to +125 C | -40C to +125C |
| Media Compatibility | Media resistant (non-corrosive gases) | — |
| Accuracy (typ) | [DATA_NEEDED: accuracy %FS] | — |
| Sensitivity | [DATA_NEEDED: V/kPa or mV/kPa] | — |
| Response Time | [DATA_NEEDED: response time ms] | — |
| Current Consumption | [DATA_NEEDED: supply current mA] | — |
| Bridge Type | On-chip silicon strain-gauge (piezo-resistive) | — |
| Signal Conditioning | On-chip, temperature compensated and calibrated | On-chip bipolar op-amp with thin-film resistors |
| RoHS-Status | Compliant | Compliant |
| Accuracy | — | +/-1.5% |
| Port Type | — | Single axial port (top) |
| Sensor Technology | — | Piezoresistive (silicon MEMS) |
| Temperature Compensation | — | Yes, on-chip calibrated |
| Part Status | — | Active |