MPXH6115AC6U vs MPXHZ6115AC6U Vergleich

Detaillierter Direktvergleich von MPXH6115AC6U von NXP Semiconductors und MPXHZ6115AC6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
MPXH6115AC6U MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U - 15-115 kPa Absolute Pressure Sensor, 5V, 8-SOIC

MPXH6115AC6U ✓ Aktiv
NXP Semiconductors
MPXHZ6115AC6U MPXHZ6115AC6U - 15-115kPa Absolute Pressure Sensor, 5V | NXP

MPXHZ6115AC6U - 15-115kPa Absolute Pressure Sensor, 5V | NXP

MPXHZ6115AC6U ✓ Aktiv

Spezifikationsvergleich

Parameter MPXH6115AC6U MPXHZ6115AC6U
Marke NXP Semiconductors NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $5,75 $7,25
Pressure Type Absolute —
Operating Pressure Range 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) —
Ausgangsspannungsbereich 0.2 V to 4.7 V (at 5 V supply) 0.2 V to 4.7 V (at VCC = 5 V)
Versorgungsspannung 4.75 V to 5.25 V (5 V typical) —
Sensitivity 45.9 mV/kPa (typical) 45.9 mV/kPa (typical)
Gehäuse 8-SOIC (0.335 inch, 8.50 mm width) Top Port 8-SOIC (0.335 in / 8.50 mm width), top port
Port Type Male - 0.13 inch (3.3 mm) Tube, Top —
Betriebstemperaturbereich -40 C to +125 C -40 °C to +125 °C
Compensated Temperature Range 0 C to +85 C 0 °C to +85 °C
Signal Conditioning On-chip bipolar op-amp + thin-film resistor network —
Ausgangstyp Analog, ratiometric to VCC Analog Voltage
Montageart Surface Mount Surface Mount
Technology Piezoresistive MEMS, monolithic silicon —
Port Orientation Top-side vertical —
MSL-Level [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL level]
RoHS-Status Compliant Compliant
Sensortyp — Absolute Pressure Sensor
Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI)
Supply Voltage (VCC) — 4.75 V to 5.25 V (5 V typical)
Accuracy — ±1.5 % over -40 °C to +125 °C
Port Style — Top port, 3.3 mm (0.13 in) tube
Media Compatibility — Dry air, non-corrosive gases (PPS gel barrier)
On-chip Signal Conditioning — Yes (amplified, temperature-compensated, calibrated)

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern