MPXHZ6115AC6U vs MPXHZ6115AC6T1 Vergleich

Detaillierter Direktvergleich von MPXHZ6115AC6U von NXP Semiconductors und MPXHZ6115AC6T1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

NXP Semiconductors
MPXHZ6115AC6U MPXHZ6115AC6U - 15-115kPa Absolute Pressure Sensor, 5V | NXP

MPXHZ6115AC6U - 15-115kPa Absolute Pressure Sensor, 5V | NXP

MPXHZ6115AC6U ✓ Aktiv
NXP Semiconductors
MPXHZ6115AC6T1 MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8

MPXHZ6115AC6T1 - 15-115kPa Absolute Pressure Sensor | NXP | SSOP-8

MPXHZ6115AC6T1 ✓ Aktiv

Spezifikationsvergleich

Parameter MPXHZ6115AC6U MPXHZ6115AC6T1
Marke NXP Semiconductors NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $7,25 $6,65
Sensortyp Absolute Pressure Sensor —
Pressure Range 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) —
Ausgangstyp Analog Voltage Analog, ratiometric to VCC
Ausgangsspannungsbereich 0.2 V to 4.7 V (at VCC = 5 V) 0.2 V to 4.7 V (at 5 V supply)
Supply Voltage (VCC) 4.75 V to 5.25 V (5 V typical) 4.75 V to 5.25 V
Sensitivity 45.9 mV/kPa (typical) 45.9 mV/kPa (nominal)
Accuracy ±1.5 % over -40 °C to +125 °C —
Betriebstemperaturbereich -40 °C to +125 °C —
Compensated Temperature Range 0 °C to +85 °C —
Port Style Top port, 3.3 mm (0.13 in) tube Top port, male 0.13 inch (3.3 mm) tube
Gehäuse 8-SOIC (0.335 in / 8.50 mm width), top port 8-SSOP (0.335 inch, 8.50 mm width), top port
Montageart Surface Mount —
Media Compatibility Dry air, non-corrosive gases (PPS gel barrier) —
On-chip Signal Conditioning Yes (amplified, temperature-compensated, calibrated) —
MSL-Level [DATA_NEEDED: MSL level] —
RoHS-Status Compliant —
Operating Pressure Range — 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) absolute
Maximum Overpressure — 400 kPa (58.02 PSI)
Pressure Type — Absolute
Betriebstemperatur — -40 °C to +125 °C
Termination Style — Gull wing, surface mount
Media Protection — Media Resistant Gel coating
On-Chip Signal Conditioning — Yes (bipolar op-amp + thin-film network)
Temperature Compensation — On-chip, calibrated
Automotive Qualification — AEC-Q100

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern