MPXV4115VC6U vs MPXV4115V6U Vergleich
Detaillierter Direktvergleich von MPXV4115VC6U von STMicroelectronics und MPXV4115V6U von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPXV4115VC6U - -115kPa Vacuum Pressure Sensor, 0.2-4.6V | STMicroelectronics
MPXV4115VC6U ✓ AktivNXP Semiconductors
MPXV4115V6U - -115 kPa Vacuum Pressure Sensor, 0.2-4.6V | NXP
MPXV4115V6U ✓ AktivSpezifikationsvergleich
| Parameter | MPXV4115VC6U | MPXV4115V6U |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,95 | $10,25 |
| Pressure Type | Vacuum (negative gauge) | Vacuum (gauge) |
| Pressure Range | 0 to -115 kPa (-16.68 PSI) | — |
| Operating Pressure Minimum | [DATA_NEEDED: kPa lower bound verification] | — |
| Ausgangstyp | Analog voltage, ratiometric | Analog voltage (ratiometric) |
| Ausgangsspannung | 0.2 V to 4.6 V | — |
| Versorgungsspannung | 4.85 V to 5.35 V (5 V nominal) | 4.75 V to 5.25 V (5 V typical) |
| Versorgungsstrom | [DATA_NEEDED: typical mA] | [DATA_NEEDED: supply current] |
| Accuracy | [DATA_NEEDED: max pressure error %] | ±1.5% Vfss (typical) |
| Response Time | 10 ms | — |
| Betriebstemperatur | -40 C to +125 C | -40C to +125C (per family datasheet) |
| Compensated Temperature | 0 C to +85 C | — |
| Port Style | Top port, 0.13 inch (3.17 mm) tube | No port (side-mount sense through package) |
| Port Size | 3.17 mm (1/8 inch) | — |
| Gehäuse | 8-SMD, Gull Wing, Top Port (SOP-8) | 8-SMD Module, gull-wing |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| Sensor Technology | Piezoresistive (silicon Wheatstone bridge) | — |
| RoHS-Status | Compliant | Compliant |
| Operating Pressure | — | -16.68 PSI to 0 PSI (-115 kPa to 0 kPa) |
| Maximum Overpressure | — | -58.02 PSI (-400 kPa) |
| Ausgangsspannungsbereich | — | 0.2 V to 4.6 V |
| Output Sensitivity | — | 38.3 mV/kPa (typical) |
| Termination Style | — | PCB, surface mount |
| Eigenschaften | — | On-chip signal conditioned, temperature compensated, factory calibrated |
| Technology | — | Piezoresistive MEMS, on-chip bipolar op-amp |