MSP430F155IPM vs MSP430F149IPM Vergleich
Detaillierter Direktvergleich von MSP430F155IPM von Texas Instruments und MSP430F149IPM von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MSP430F155IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430F155IPM ✓ AktivSpezifikationsvergleich
| Parameter | MSP430F155IPM | MSP430F149IPM |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Microcontroller Type | 16-bit mixed-signal MCU | — |
| CPU Architecture | 16-bit RISC with 16-bit registers | — |
| Maximale Taktfrequenz | 8 MHz | 8 MHz |
| Flash Memory | 16 KB | — |
| Flash Organization | 16K x 8 plus 256 B | — |
| SRAM | 512 B | — |
| ADC Resolution | 12 bit | — |
| DAC Configuration | Dual 12 bit | — |
| Comparator | 1 integrated comparator | — |
| DMA Controller | Integrated | — |
| Serial Interfaces | I2C, SPI, and UART | — |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| I/O Port Count | 22 I/O positions | — |
| Gehäuse | 64-LQFP, 10 x 10 mm | 64-LQFP (PM), 10x10 mm |
| Betriebstemperaturbereich | -40 C to +85 C | — |
| Low-Power Modes | 5 modes | — |
| RoHS-Status | Unknown | Compliant |
| REACH Status | Unknown | — |
| AEC-Q100 Qualification | Not applicable | — |
| Core | — | MSP430 CPU16 (16-bit RISC) |
| Series | — | MSP430x1xx |
| Program Memory | — | 60 KB Flash (60K x 8 + 256B info) |
| RAM | — | 2 KB |
| Active Mode Current (1 MHz, 2.2 V) | — | 280 µA |
| Standby Mode Current | — | 1.6 µA |
| Off Mode Current (RAM Retention) | — | 0.1 µA |
| Wake-up From Standby | — | <6 µs |
| ADC | — | 12-bit SAR, 8 channels, up to 200 ksps |
| DAC | — | 2x 12-bit DAC |
| Comparators | — | 2 on-chip |
| Communication Interfaces | — | 2x USART (UART/SPI), 1x I2C/SPI, 1x UART |
| Timers | — | 16-bit Timer A and Timer B, WDT+, basic timer1 |
| Hardware Multiplier | — | Yes (16x16, signed/unsigned) |
| Betriebstemperatur | — | -40C to +85C (IPM suffix) |
| Montageart | — | Surface Mount |