MX30UF4G16AB vs MX30UF4G18AB Vergleich
Detaillierter Direktvergleich von MX30UF4G16AB von Macronix und MX30UF4G18AB von Macronix. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MX30UF4G16AB | MX30UF4G18AB |
|---|---|---|
| Marke | Macronix | Macronix |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,55 | $2,80 |
| Speichertyp | Non-volatile NAND Flash (SLC) | Non-volatile NAND Flash (SLC) |
| Density | 4 Gbit (512 MB) | 4 Gbit (512 MiB x8) |
| Speicherorganisation | 256 M x 16 | — |
| Supply Voltage (VCC) | 1.7 V to 1.95 V (1.8 V typical) | 1.7 V to 1.95 V (1.8 V typ) |
| Bus Width | x16 (also supports x8) | — |
| Schnittstelle | Parallel / Asynchronous NAND (ONFI 1.0) | 8-bit parallel asynchronous |
| Access Time (tRC) | 25 ns (typical) | — |
| Page Size | [DATA_NEEDED: page size bytes] | 2,112 bytes (2,048 + 64 spare) or 4,320 bytes ONFI mode |
| Block Size | [DATA_NEEDED: block size / block erase granularity] | 128 KiB (64 pages x 2 KiB) [DATA_NEEDED: exact blocks-per-die count] |
| Standby Current (Sleep Mode) | 50 uA (maximum) | 50 uA max |
| Endurance (P/E Cycles) | [DATA_NEEDED: typical P/E cycles] | — |
| Data Retention | [DATA_NEEDED: typical data retention years] | [DATA_NEEDED: typical retention spec] |
| Betriebstemperaturbereich | -40C to +85C (industrial) | — |
| Gehäuse | 63-ball VFBGA, 9 mm x 11 mm | 48-pin TSOP I (12 mm x 20 mm x 1.0 mm) for -TI; 63-VFBGA (9x11) for -XKI |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| ONFI Compliance | ONFI 1.0 parameter page | ONFI 1.0 |
| Bad Block Management | External (host-managed) | — |
| ECC Support | External hardware ECC required | — |
| Cell Technology | — | Single-Level Cell (SLC), 1 bit/cell |
| Page Read Time (tR) | — | 25 ns (async, typical) [DATA_NEEDED: confirmed from datasheet v1.2 timing table] |
| Endurance (P/E cycles) | — | [DATA_NEEDED: typical endurance spec] |
| Betriebstemperatur | — | -40 C to +85 C (industrial) |
| MSL-Level | — | 3 [DATA_NEEDED: confirm from datasheet] |
| Lead-free | — | Yes |