NE5532AP vs MC33178PG Vergleich
Detaillierter Direktvergleich von NE5532AP von Texas Instruments und MC33178PG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532AP | MC33178PG |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Manufacturer | Texas Instruments | — |
| Part Number | NE5532AP | — |
| Amplifier Type | Low-Noise Operational Amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Gehäuse / Bauform | 8-PDIP (through-hole, 2.54 mm pitch) | — |
| Supply Voltage (Dual) | ±5 V to ±15 V (max ±18 V) | — |
| Unity-Gain Bandwidth | 10 MHz (typ.) | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz (typ. at 1 kHz) | — |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | [DATA_NEEDED: slew rate] |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typ.) | — |
| DC Voltage Gain | 100 V/mV (typ., 100 dB) | — |
| Peak-to-Peak Output Swing | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) | — |
| Output Drive | 600 ohm loads (typ.) | — |
| Input Protection | Input-protection diodes | — |
| Output Protection | Output short-circuit protection | — |
| Betriebstemperaturbereich | 0 °C to +70 °C (NE5532x commercial) | — |
| Montageart | Through-Hole (PDIP) | Through-hole |
| RoHS-Status | Compliant (Pb-free) | unknown |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual operational amplifier |
| Supply Voltage Range | — | 2 V to 18 V |
| Gain-Bandwidth Product | — | 5 MHz |
| Technology | — | Bipolar |
| Input Transistor Type | — | High-frequency PNP |
| Gehäuse | — | 8-pin PDIP |
| Anzahl der Pins | — | 8 pins |
| Temperature Grade | — | Industrial temperature |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |