NE5532AP vs NE5532P Vergleich
Detaillierter Direktvergleich von NE5532AP von Texas Instruments und NE5532P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532AP - Dual Low-Noise Op Amp, 10MHz, 8-PDIP | Texas Instruments
NE5532AP ✓ AktivSpezifikationsvergleich
| Parameter | NE5532AP | NE5532P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Manufacturer | Texas Instruments | — |
| Part Number | NE5532AP | — |
| Amplifier Type | Low-Noise Operational Amplifier | — |
| Number of Channels | 2 (Dual) | — |
| Gehäuse / Bauform | 8-PDIP (through-hole, 2.54 mm pitch) | — |
| Supply Voltage (Dual) | ±5 V to ±15 V (max ±18 V) | — |
| Unity-Gain Bandwidth | 10 MHz (typ.) | 10 MHz typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz (typ. at 1 kHz) | 5 nV/√Hz typical at 1 kHz |
| Slew Rate | [DATA_NEEDED: slew rate V/us] | 9 V/µs typical |
| Common-Mode Rejection Ratio (CMRR) | 100 dB (typ.) | — |
| DC Voltage Gain | 100 V/mV (typ., 100 dB) | — |
| Peak-to-Peak Output Swing | 32 V typ. (VCC± = ±18 V, RL = 600 ohm) | — |
| Output Drive | 600 ohm loads (typ.) | — |
| Input Protection | Input-protection diodes | — |
| Output Protection | Output short-circuit protection | — |
| Betriebstemperaturbereich | 0 °C to +70 °C (NE5532x commercial) | — |
| Montageart | Through-Hole (PDIP) | Through hole |
| RoHS-Status | Compliant (Pb-free) | [DATA_NEEDED: RoHS status] |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range | — | ±5 V to ±15 V |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Input Offset Voltage | — | 4000 µV maximum |
| Process Technology | — | Bipolar |
| Gehäuse | — | 8-pin PDIP (P) |
| Betriebstemperatur | — | 0 °C to 70 °C |
| Primary Application | — | Audio |
| REACH Status | — | [DATA_NEEDED: REACH status] |