NE5532APG4 vs NE5532D Vergleich
Detaillierter Direktvergleich von NE5532APG4 von Texas Instruments und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | NE5532APG4 | NE5532D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,66 | $0,00 |
| Amplifier Type | General-purpose operational amplifier | Dual low-noise operational amplifier |
| Number of Amplifier Circuits | 2 circuits | 2 circuits |
| Number of Channels | 2 channels | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Gehäuse | 8-DIP (0.300 inch, 7.62 mm) | 8-pin SOIC |
| Montageart | Through-hole | Surface Mount |
| Lead Pitch | 7.62 mm | — |
| Unit Price | $0.6560 per unit as of 2026-10-22 | — |
| Reported Inventory | 4,320 pieces as of 2026-10-22 | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input-Bias Current | [DATA_NEEDED: input-bias current] | — |
| Voltage Noise Density | [DATA_NEEDED: voltage noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 10 V/μs typical |
| Output Current | [DATA_NEEDED: output current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C for NE5532x |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |