NE5532D vs NE5532PE4 Vergleich
Detaillierter Direktvergleich von NE5532D von Texas Instruments und NE5532PE4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ Aktiv
Spezifikationsvergleich
| Parameter | NE5532D | NE5532PE4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Amplifier Type | Dual low-noise operational amplifier | Operational amplifier |
| Number of Amplifier Circuits | 2 circuits | — |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| DC Voltage Gain | 100 V/mV typical | 100 V/mV typical |
| Slew Rate | 10 V/μs typical | 9 V/µs typical |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Specified Supply Voltage Range | ±5 V to ±15 V | — |
| Maximum Total Supply Voltage | 30 V | — |
| Output Voltage Swing | 32 V peak-to-peak typical at ±18 V and 600 Ω load | — |
| Betriebstemperaturbereich | 0 °C to +70 °C for NE5532x | — |
| Gehäuse | 8-pin SOIC | 8-DIP, 0.300 in, 7.62 mm |
| Montageart | Surface Mount | Through-hole |
| Product Category | Standard general-purpose amplifier | — |
| Application Category | Audio applications | Audio |
| Manufacturer | Texas Instruments | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Yes |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 800 nA typical |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain at specified frequency] | — |
| Noise at 20 Hz to 20 kHz | [DATA_NEEDED: total input noise over audio bandwidth] | — |
| Number of Circuits | — | 2 circuits |
| Architecture | — | Voltage-feedback |
| Total Supply Voltage | — | 30 V maximum |
| Offset Voltage | — | 500 µV typical |
| Lebenszyklusstatus | — | Active |