NE5532D8 vs NE5532D Vergleich
Detaillierter Direktvergleich von NE5532D8 von onsemi und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | NE5532D8 | NE5532D |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,18 | $0,00 |
| Amplifier Type | Dual internally compensated operational amplifier | Dual low-noise operational amplifier |
| Number of Amplifiers | 2 channels | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Supply Voltage Range | 3 V to 20 V | — |
| Single-Supply Operation | 3 V to 20 V | — |
| Dual-Supply Operation | +/-3 V to +/-20 V | — |
| Noise Classification | Low-noise operational amplifier | — |
| Compensation | Internal; unity-gain stable | — |
| Input Bias Current | 200 nA | [DATA_NEEDED: input bias current] |
| Ruhestrom | 1 uA | — |
| Gehäuse | 8-pin SOIC | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| Package Height | 0.154 mm, as represented in the verified distributor listing | — |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface Mount |
| Primary Applications | High-quality and professional audio equipment | — |
| Additional Applications | Instrumentation, control circuits, and telephone channel amplifiers | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Slew Rate | — | 10 V/μs typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Betriebstemperaturbereich | — | 0 °C to +70 °C for NE5532x |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |