NE5532D8G vs NE5532D Vergleich
Detaillierter Direktvergleich von NE5532D8G von onsemi und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | NE5532D8G | NE5532D |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Amplifier Type | Dual low-noise operational amplifier | Dual low-noise operational amplifier |
| Number of Circuits | 2 circuits | — |
| Compensation | Internally compensated | — |
| Supply Voltage Range | 3 V to 20 V | — |
| Gain-Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/us | 10 V/μs typical |
| Input Noise | 1 uV | — |
| Input Offset Voltage | 4 mV | — |
| Betriebstemperatur | Commercial temperature | — |
| Gehäuse | 8-SOIC | 8-pin SOIC |
| Montageart | Surface mount | Surface Mount |
| Protection Features | Input-protection diodes and output short-circuit protection | — |
| Distributor Classification | Instrumentation, op amp, buffer amplifier | — |
| RoHS-Status | RoHS3 compliant | [DATA_NEEDED: RoHS status] |
| Lebenszyklusstatus | Active | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Betriebstemperaturbereich | — | 0 °C to +70 °C for NE5532x |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |