NE5532N vs NE5532D Vergleich
Detaillierter Direktvergleich von NE5532N von onsemi und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | NE5532N | NE5532D |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Product Type | Dual internally compensated operational amplifier | — |
| Number of Circuits | 2 | — |
| Amplifier Type | General Purpose | Dual low-noise operational amplifier |
| Gehäuse | 8-PDIP (0.300 in, 7.62 mm) | 8-pin SOIC |
| Packaging | Tube | — |
| Gain Bandwidth Product | 10 MHz | — |
| Slew Rate | 9 V/µs | 10 V/μs typical |
| Compensation | Internal frequency compensation | — |
| Noise Performance | Low noise | — |
| Output Drive | Improved output-drive capability | — |
| Small-Signal Bandwidth | High small-signal bandwidth | — |
| Power Bandwidth | High power bandwidth | — |
| Montagestil | Through-hole | — |
| Versorgungsspannung | [DATA_NEEDED: supply voltage] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C for NE5532x |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Montageart | — | Surface Mount |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |