NE5532PE4 vs NE5532D Vergleich
Detaillierter Direktvergleich von NE5532PE4 von Texas Instruments und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | NE5532PE4 | NE5532D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Amplifier Type | Operational amplifier | Dual low-noise operational amplifier |
| Number of Circuits | 2 circuits | — |
| Architecture | Voltage-feedback | — |
| Application Category | Audio | Audio applications |
| Total Supply Voltage | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 9 V/µs typical | 10 V/μs typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| DC Voltage Gain | 100 V/mV typical | 100 V/mV typical |
| Input Bias Current | 800 nA typical | [DATA_NEEDED: input bias current] |
| Offset Voltage | 500 µV typical | — |
| Gehäuse | 8-DIP, 0.300 in, 7.62 mm | 8-pin SOIC |
| Montageart | Through-hole | Surface Mount |
| RoHS-Status | Yes | [DATA_NEEDED: RoHS status] |
| Lebenszyklusstatus | Active | — |
| Number of Amplifier Circuits | — | 2 circuits |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Betriebstemperaturbereich | — | 0 °C to +70 °C for NE5532x |
| Product Category | — | Standard general-purpose amplifier |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |