NE5534ADRE4 vs NE5534D Vergleich
Detaillierter Direktvergleich von NE5534ADRE4 von Texas Instruments und NE5534D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | NE5534ADRE4 | NE5534D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Single general-purpose operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Input Noise Density | 3.5 nV/√Hz typical | — |
| DC Voltage Gain | 100 dB typical | 100 dB typical |
| Open-Loop Gain | 100 V/mV typical | — |
| Slew Rate | 13 V/ms typical | 13 V/us typical |
| Peak-to-Peak Output Swing | 32 V typical at VCC+ = +18 V and RL = 600 Ω | — |
| Supply Voltage Range | +3 V to +20 V | — |
| Total Supply Current | 38 mA per channel | — |
| Input Bias Current | 500 nA typical | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection Ratio | 10 dB typical as shown in source snippet | 100 dB typical |
| Offset Nulling | Supported | — |
| External Compensation | Supported | — |
| Gehäuse | 8-SOIC (0.154 inch, 3.90 mm width) | 8-SOIC |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |