NE5534DR2G vs NE5532D Vergleich
Detaillierter Direktvergleich von NE5534DR2G von onsemi und NE5532D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5532D - Dual 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5532D ✓ AktivSpezifikationsvergleich
| Parameter | NE5534DR2G | NE5532D |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Product Type | Single low-noise operational amplifier | — |
| Number of Circuits | 1 circuit | — |
| Amplifier Type | General Purpose | Dual low-noise operational amplifier |
| Supply Voltage Range | 3 V to 20 V | — |
| Gain Bandwidth Product | 10 MHz | — |
| Slew Rate | 13 V/µs | 10 V/μs typical |
| Gehäuse | 8-SOIC, 0.154 in / 3.90 mm width | 8-pin SOIC |
| Montageart | Surface mount | Surface Mount |
| Packaging | Tape and reel (TR) | — |
| Output Drive Capability | Improved output-drive capability | — |
| Small-Signal Bandwidth | Higher than TL083 family, exact value not provided | — |
| Power Bandwidth | Considerably higher than TL083 family, exact value not provided | — |
| Noise Performance | Low noise, exact noise value not provided | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| Number of Amplifier Circuits | — | 2 circuits |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| DC Voltage Gain | — | 100 V/mV typical |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| Specified Supply Voltage Range | — | ±5 V to ±15 V |
| Maximum Total Supply Voltage | — | 30 V |
| Output Voltage Swing | — | 32 V peak-to-peak typical at ±18 V and 600 Ω load |
| Betriebstemperaturbereich | — | 0 °C to +70 °C for NE5532x |
| Product Category | — | Standard general-purpose amplifier |
| Application Category | — | Audio applications |
| Manufacturer | — | Texas Instruments |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain at specified frequency] |
| Noise at 20 Hz to 20 kHz | — | [DATA_NEEDED: total input noise over audio bandwidth] |