OPA2277UA vs LT1013DD Vergleich
Detaillierter Direktvergleich von OPA2277UA von Texas Instruments und LT1013DD von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA2277UA | LT1013DD |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Channels | 2 (Dual) | 2 channels |
| Amplifier Type | Precision Operational Amplifier | Dual precision operational amplifier |
| Input Offset Voltage (max) | 10 µV | — |
| Offset Drift (typ) | ±0.1 µV/°C | — |
| Open-Loop Gain (min) | 134 dB | — |
| Common-Mode Rejection (min) | 140 dB | — |
| Power-Supply Rejection (min) | 130 dB | — |
| Quiescent Current per Channel (typ) | 800 µA | — |
| Supply Voltage Range | ±2 V to ±18 V | 5 V to 44 V |
| Supply Voltage (Single) | 4 V to 36 V | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Slew Rate | 2 V/µs | — |
| Output Swing (RL=2 kΩ, ±15V) | ±14 V (within 1 V of rails) | — |
| Betriebstemperaturbereich | -40°C to +125°C | — |
| Gehäuse | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | 3 (168 hours) | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Family Supply Range | — | 4 V to 44 V |
| Pin-Anzahl | — | 8 pins |
| Betriebstemperatur | — | 0 °C to 70 °C |
| Product Classification | — | Standard general-purpose amplifier |
| Input Offset Voltage | — | 150 µV maximum at 25 °C for LT1013A |
| Input Offset Voltage Temperature Coefficient | — | 2.5 µV/°C maximum for LT1013A |
| Single-Supply Operation | — | Supported; input voltage range extends to ground |
| Output Swing | — | Output swings to ground while sinking current |
| Precision Characteristics | — | High gain, low supply current, low noise, and low offset-voltage temperature coefficient |
| REACH Status | — | [DATA_NEEDED: REACH status] |