OPA2277UA vs OPA4192IPW Vergleich
Detaillierter Direktvergleich von OPA2277UA von Texas Instruments und OPA4192IPW von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
OPA4192IPW - 36V Quad Precision RRIO Op Amp | Texas Instruments
OPA4192IPW ✓ AktivSpezifikationsvergleich
| Parameter | OPA2277UA | OPA4192IPW |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,95 | $2,95 |
| Number of Channels | 2 (Dual) | 4 (quad) |
| Amplifier Type | Precision Operational Amplifier | Precision, Low-Noise, Low-Iq |
| Input Offset Voltage (max) | 10 µV | — |
| Offset Drift (typ) | ±0.1 µV/°C | — |
| Open-Loop Gain (min) | 134 dB | — |
| Common-Mode Rejection (min) | 140 dB | — |
| Power-Supply Rejection (min) | 130 dB | — |
| Quiescent Current per Channel (typ) | 800 µA | — |
| Supply Voltage Range | ±2 V to ±18 V | — |
| Supply Voltage (Single) | 4 V to 36 V | — |
| Gain-Bandwidth Product | 1 MHz | — |
| Slew Rate | 2 V/µs | 20 V/µs |
| Output Swing (RL=2 kΩ, ±15V) | ±14 V (within 1 V of rails) | — |
| Betriebstemperaturbereich | -40°C to +125°C | -40 °C to +125 °C |
| Gehäuse | 8-pin SOIC (D) | TSSOP-14 (PW) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hours) | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Manufacturer | — | Texas Instruments |
| Series | — | OPAx192 (e-trim) |
| Topologie | — | Rail-to-Rail Input / Output (RRIO) |
| Supply Voltage Range (Single Supply) | — | 4.5 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | ±4 V to ±18 V |
| Gain Bandwidth Product (GBP) | — | 10 MHz |
| Input Offset Voltage (typical) | — | ±5 µV |
| Input Offset Voltage (max over temp) | — | [DATA_NEEDED: Vos max over temperature] |
| Input Bias Current (typical) | — | 5 pA |
| Input Voltage Noise Density | — | 5.5 nV/√Hz at 1 kHz |
| Quiescent Current per Channel | — | 1 mA (typical) |
| Ausgangstyp | — | Rail-to-Rail |