OPA37GU vs AD5174BRMZ-10 Vergleich

Detaillierter Direktvergleich von OPA37GU von Texas Instruments und AD5174BRMZ-10 von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
OPA37GU OPA37GU - 63MHz Ultra-Low-Noise Precision Op Amp | TI

OPA37GU - 63MHz Ultra-Low-Noise Precision Op Amp | TI

OPA37GU ✓ Aktiv

Spezifikationsvergleich

Parameter OPA37GU AD5174BRMZ-10
Marke Texas Instruments Analog Devices
Kategorie Amplifier ICs Data Acquisition ICs
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $0,00 $2,89
Amplifier Type Single decompensated precision operational amplifier —
Number of Channels 1 channel 1
Gain-Bandwidth Product 63 MHz —
Slew Rate 11.9 V/µs —
Input Noise Density 4.5 nV/√Hz maximum at 1 kHz —
Input Offset Voltage 100 µV maximum —
Input Offset Voltage Drift 0.4 µV/°C maximum —
Open-Loop Gain 117 dB minimum —
Common-Mode Rejection 100 dB minimum —
Power-Supply Rejection 94 dB minimum —
Supply Voltage Range ±4 V to ±22 V —
Gehäuse 8-pin SOIC —
Montageart Surface Mount Surface Mount
Betriebstemperaturbereich -40 °C to +85 °C —
Input Bias Current [DATA_NEEDED: input bias current] —
Output Current [DATA_NEEDED: output current] —
Settling Time [DATA_NEEDED: settling time] —
Ruhestrom [DATA_NEEDED: quiescent current] —
RoHS-Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] REACH Unaffected - per PartGenie listing
Lead-Free Status [DATA_NEEDED: lead-free status] —
Part Number — AD5174BRMZ-10
Manufacturer — Analog Devices Inc.
Product Type — Single-Channel Digital Rheostat (Digital Potentiometer)
Number of Taps — 1024
Nominal End-to-End Resistance (R-AB) — 10 kΩ
Resistance Tolerance — ±5 kΩ max (in-package tolerance)
Schnittstelle — SPI (3-wire serial, up to 25 MHz)
Nonvolatile Memory — Yes - 50-times programmable (50-TP)
Supply Voltage - Single — 2.7 V to 5.5 V
Supply Voltage - Dual — ±2.5 V to ±2.75 V
Wiper Resistance (R-W) — [DATA_NEEDED: wiper resistance typical/max in ohms]
INL (max) — ±2 LSB
DNL (max) — ±1 LSB
Betriebstemperatur — -40 °C to +125 °C (extended industrial)
Gehäuse / Bauform — 10-MSOP (RM-10 suffix), 3 mm × 3 mm
MSL-Level — 1 (Unlimited) - per PartGenie listing
RoHS Compliance — ROHS3 Compliant

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern