OPA551PA vs OPA604AP Vergleich
Detaillierter Direktvergleich von OPA551PA von Texas Instruments und OPA604AP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA551PA | OPA604AP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | High-voltage, high-current operational amplifier | — |
| Supply Voltage Range | 60 V | 5 V to 48 V total |
| Typical Output Current | 380 mA | — |
| High-Current Capability | 200 mA | — |
| Unity-Gain Bandwidth | 3 MHz | 20 MHz |
| Slew Rate | 15 V/µs | 25 V/us |
| Gain Configuration | Unity-gain stable | — |
| Number of Circuits | 1 | 1 circuit |
| Amplifier Type | Standard (general purpose) amplifier | Single-circuit operational amplifier |
| Package Type | 8-PDIP | — |
| Montageart | Through-hole | Through-hole |
| Input Voltage | 60 V maximum supply | — |
| Output Current | 380 mA typical | [DATA_NEEDED: output current] |
| Bandwidth | 3 MHz | — |
| Operating Voltage | 60 V | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | unknown |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -25 C to +85 C |
| Input Transistor Type | — | FET |
| Input Noise Density | — | 10 nV/sqrt(Hz) |
| Maximum Total Supply Voltage | — | 48 V |
| Maximum Symmetric Supply | — | ±24 V |
| Gain Stability | — | Unity-gain stable |
| Gehäuse | — | 8-pin plastic mini-DIP |
| Offset Voltage | — | Laser-trimmed |
| Distortion | — | Low at 1 kHz |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| REACH Status | — | unknown |