OPA602BP vs OPA627BP Vergleich
Detaillierter Direktvergleich von OPA602BP von Texas Instruments und OPA627BP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
OPA602BP - 6.5MHz 35V/us Precision Difet Op Amp | Texas Instruments
OPA602BP ✓ AktivSpezifikationsvergleich
| Parameter | OPA602BP | OPA627BP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,05 | $21,30 |
| Amplifier Type | High-Speed Precision Difet Operational Amplifier | Precision High-Speed Difet Operational Amplifier |
| Number of Circuits | 1 | — |
| Gain Bandwidth Product | 6.5 MHz | 16 MHz |
| Slew Rate | 35 V/us | 55 V/us |
| Input Offset Voltage (Max) | +/-250 uV | — |
| Input Bias Current (Max) | +/-1 pA | — |
| Settling Time | To 0.01% | — |
| Supply Voltage Range | +/-5 V to +/-18 V | ±4.5 V to ±18 V (9 V to 36 V total) |
| Stability | Unity-gain stable | — |
| Capacitive Load Drive | Up to 1500 pF | — |
| Rated Load Condition | 1 kOhm in parallel with 500 pF | — |
| Input Stage | Difet (dielectrically isolated FET), laser-trimmed | — |
| Gehäuse | 8-PDIP | 8-Pin PDIP (P) |
| Montageart | Through Hole | Through Hole |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Channels | — | 1 |
| Offset Drift | — | 0.8 uV/C max |
| Input Type | — | JFET (Difet process) |
| Input Offset Voltage (B grade) | — | [DATA_NEEDED: input offset voltage max] |
| Input Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Versorgungsstrom | — | [DATA_NEEDED: quiescent supply current] |
| Product Family | — | OPA6x7 (OPA627 / OPA637) |
| Output Current | — | [DATA_NEEDED: output current] |