OPA828 vs NE5534IP Vergleich
Detaillierter Direktvergleich von OPA828 von Texas Instruments und NE5534IP von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA828 | NE5534IP |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | JFET-Input Operational Amplifier (RRO) | — |
| Kanäle | 1 | — |
| Gain Bandwidth Product | 45 MHz | — |
| Slew Rate | 150 V/us | 13 V/µs typ |
| Supply Voltage Range | +/-4 V to 36 V (8 V to 36 V single supply) | — |
| Input Voltage Noise Density | 4 nV/Hz at 1 kHz | — |
| Input Voltage Noise (0.1 Hz to 10 Hz) | 60 nVRMS | — |
| Input Bias Current | 1 pA (typical) | [DATA_NEEDED: typical and maximum input bias current] |
| Input Offset Voltage | 50 uV | [DATA_NEEDED: typical and maximum input offset voltage] |
| Input Offset Drift | 0.45 uV/C | — |
| Ausgangstyp | Rail-to-Rail Output (RRO) | — |
| Input Type | MUX-friendly JFET inputs | — |
| Gehäuse | SOIC-8 (D) / HVSSOP-8 (DGN) | 8-pin PDIP |
| Montageart | Surface Mount | Through-hole |
| Betriebstemperatur | -40C to +125C | — |
| RoHS-Status | Compliant | Compliant |
| Ruhestrom | [DATA_NEEDED: quiescent current per amplifier] | — |
| Successor To | OPA627 / OPA827 | — |
| Product Type | — | Single low-noise operational amplifier |
| Unity-Gain Bandwidth | — | 10 MHz typ |
| Maximum Supply Voltage | — | 30 V |
| Equivalent Input Noise Voltage Density | — | 3.5 nV/√Hz |
| DC Voltage Gain | — | 100 dB typ |
| Common-Mode Rejection Ratio | — | 100 dB typ |
| Peak-to-Peak Output Voltage Swing | — | 32 V typ with VCC = ±18 V |
| Input Offset Current | — | 500 nA |
| Maximum Input Offset Voltage | — | 5000 µV |
| Betriebstemperaturbereich | — | 0°C to 70°C |
| Versorgungsstrom | — | [DATA_NEEDED: typical and maximum supply current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Swing | — | [DATA_NEEDED: output voltage swing by supply condition] |
| Total Harmonic Distortion | — | [DATA_NEEDED: total harmonic distortion] |