PCA9527DP,118 vs NVT2002DP,118 Vergleich
Detaillierter Direktvergleich von PCA9527DP,118 von NXP Semiconductors und NVT2002DP,118 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
NVT2002DP,118 - 2-Bit Bidirectional Level Translator 1.0-5V | NXP
NVT2002DP,118 ✓ AktivSpezifikationsvergleich
| Parameter | PCA9527DP,118 | NVT2002DP,118 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,52 | $0,19 |
| Funktion | 3-channel bidirectional open-drain bus buffer | — |
| Bus Type | I2C-bus, SMBus, HDMI DDC, CEC | — |
| Number of Channels | 3 | — |
| Maximum Bus Frequency | 400 kHz | — |
| Propagation Delay Time | 115 ns | — |
| Supply Voltage Range | 2.7 V to 5.5 V | — |
| Supply Current (max) | 100 mA | — |
| Eingangskapazität | 8 pF | — |
| Ausgangstyp | Open-drain with rise-time accelerator | — |
| Enable-Pin | EN, active-HIGH, internal ~100 kOhm pull-up to VCC(B) | — |
| Level Shifting | Yes, via two separate supply pins (VCC(A) / VCC(B)) | — |
| Gehäuse | 10-TSSOP / 10-TFSOP, 0.118 inch body width | TSSOP-8 (DP) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Packing Suffix | ,118 = Tape & Reel, moisture barrier | — |
| RoHS-Status | Compliant (per JLCPCB listing) | [DATA_NEEDED: RoHS status] |
| Application | HDMI DDC clock/data and CEC buffering | — |
| Translator Type | — | Bidirectional voltage level translator |
| Circuit | — | 1 circuit, 2 channels |
| A-Side Voltage Range (Vref(A)) | — | 1.0 V to 3.6 V |
| B-Side Voltage Range (Vref(B)) | — | 1.8 V to 5.5 V |
| Translation Range | — | 1.0 V to 5 V |
| Direction Control | — | No direction pin required |
| Application Mode | — | Open-drain and push-pull |
| Max Open-Drain Data Rate | — | < 33 MHz |
| Enable Input | — | EN, active HIGH (LOW = high-impedance I/O) |
| Supply Current (disabled) | — | [DATA_NEEDED: supply current disabled] |
| Channel-to-Channel Matching | — | All channels same electrical characteristics, minimal deviation |
| Reel Ordering Code Suffix | — | ,118 (standard packing) |