PCA9548APW vs PCA9548A Vergleich

Detaillierter Direktvergleich von PCA9548APW von NXP Semiconductors und PCA9548A von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Texas Instruments
PCA9548A PCA9548A - 8-Channel I2C Switch with Reset | TI

PCA9548A - 8-Channel I2C Switch with Reset | TI

PCA9548A ✓ Aktiv

Spezifikationsvergleich

Parameter PCA9548APW PCA9548A
Marke NXP Semiconductors Texas Instruments
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $1,55 $0,79
Funktion 8-channel I2C-bus bidirectional translating switch with reset 8-channel bidirectional I2C translating switch
Number of Channels 8 (SCx/SDx downstream pairs) 8 downstream SCx/SDx pairs
Address Pins 3 (A0, A1, A2) - up to 8 devices on bus (64 channels) —
Supply Voltage (VDD) 2.3 V to 5.5 V —
I/O Voltage Tolerance Up to 5.5 V (independent of VDD level-shifting) —
RESET Input Active-low; clears channel selection and deselects all switches —
I2C Clock Frequency 0 kHz to 400 kHz (Standard and Fast-mode) —
Channel On-Resistance [DATA_NEEDED: typical Ron at 3.3V / 5V] —
Standby Current [DATA_NEEDED: typical standby ICC] —
Betriebstemperatur -40 C to +85 C [DATA_NEEDED: operating temperature range]
Gehäuse 24-TSSOP (PW, 7.8 mm body) 24-TSSOP (PW)
Montageart Surface Mount Surface Mount
MSL-Level 1 (per JEDEC J-STD-020) —
Lead-Free / RoHS Yes (compliant) —
Compliance RoHS, REACH (per NXP product page) —
Supply Voltage Range — 2.3 V to 5.5 V
I2C Bus Speed Support — Standard-Mode 100 kHz, Fast-Mode 400 kHz
Control Interface — I2C/SMBus, single 8-bit control register
Hardware Address Pins — 3 (A0, A1, A2) - up to 8 devices per bus
Reset Input — Yes, active-low RESET
Voltage Translation — Yes, via pass-gate switch voltage referencing
Schnittstellentyp — 2-wire bus (SCL/SDA)
Channel Selection — Individual or any combination of channels
Power-On Reset — Internal, resets registers to default state
RoHS-Status — Compliant
Ruhestrom — [DATA_NEEDED: quiescent current]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern