PCA9685PW-Q900118 vs PCA9685PW,118 Vergleich
Detaillierter Direktvergleich von PCA9685PW-Q900118 von NXP Semiconductors und PCA9685PW,118 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
PCA9685PW-Q900118 - 16-Channel 12-bit I2C LED Controller | NXP
PCA9685PW-Q900118 ✓ AktivSpezifikationsvergleich
| Parameter | PCA9685PW-Q900118 | PCA9685PW,118 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | LED Drivers | LED Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,78 | $1,99 |
| Product Type | I2C LED Driver / PWM Controller | — |
| Number of LED Outputs | 16 | — |
| PWM Resolution | 12-bit (4096 steps) | 12-bit (4096 steps, 0% to 100% duty cycle) |
| Programmable PWM Frequency | 24 Hz to 1526 Hz | — |
| Per-Channel Sink Current (Continuous) | 25 mA | — |
| Per-Channel Sink Current (Peak) | 100 mA (transient) | — |
| Logic Supply Voltage (VDD) | 2.3 V to 5.5 V | — |
| LED Supply Voltage (V+) | Up to 5.5 V (open-drain output) | — |
| I2C Interface | Standard / Fast / Fast-Mode-Plus (up to 1 MHz) | — |
| Programmable I2C Addresses | 6 selectable (A0-A5 pins), up to 62 devices per bus | Up to 62 devices per bus (6 address pins) |
| Internal Oscillator | 25 MHz (no external clock required) | — |
| Output Enable Pin (OE) | Yes, active-low | — |
| Software Reset | Yes (SWRST register) | — |
| Betriebstemperaturbereich | -40 C to +85 C | — |
| Gehäuse | TSSOP-28 (4.4 mm body, 0.65 mm pitch) | 28-TSSOP (4.40 mm body width, SOT-355-1) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Funktion | — | 16-channel 12-bit PWM LED controller |
| Anzahl der Ausgänge | — | 16 |
| Per-Channel Output Current | — | 25 mA |
| Topologie | — | Open-Drain / Push-Pull PWM |
| Schnittstelle | — | I2C-bus, Fast-Mode Plus (up to 1 MHz) |
| Supply Voltage VDD | — | 2.3 V to 5.5 V |
| Output Voltage Range (LED supply) | — | [DATA_NEEDED: upper LED supply voltage rating] |
| Internal Oscillator Frequency | — | 25 MHz (typical) |
| Output Rise/Fall Time | — | [DATA_NEEDED: transition time in ns] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current in mA] |
| Betriebstemperatur | — | -40 C to +85 C |
| Lead-Free | — | Yes |
| Primary Application | — | RGBA backlighting and color mixing |