SIT1044T vs TJA1057GTJ Vergleich
Detaillierter Direktvergleich von SIT1044T von SIT und TJA1057GTJ von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | SIT1044T | TJA1057GTJ |
|---|---|---|
| Marke | SIT | NXP Semiconductors |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,16 | $0,71 |
| Product Type | CAN FD Transceiver | — |
| Protocol Standard | ISO 11898-2:2016 (high-speed CAN) | — |
| Maximum Data Rate | 5 Mbps (CAN FD) | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Supply Current (Dominant, typical) | 70 mA | — |
| Supply Current (Standby) | 30 µA | — |
| Bus Fault Protection | ±40 V on CANH/CANL | ±42 V typical (load dump) |
| ESD Protection (HBM, bus pins) | ±8 kV | — |
| Betriebstemperatur | -40 °C to +125 °C | -40 °C to +150 °C |
| Gehäuse | SOP-8 | 8-SO (SOIC-8, 3.9 mm body) |
| Low-Power Mode | Yes (standby with wake-up) | — |
| Wake-up Pin | Yes | — |
| TXD Dominant Time-out | Yes | — |
| Thermisches Abschalten | Yes | — |
| Undervoltage Protection | Yes | — |
| RoHS | Compliant | — |
| Funktion | — | High-speed CAN transceiver |
| Datenrate | — | Up to 1 Mbit/s |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | ISO 11898-2 (CAN, CAN FD) |
| Montageart | — | Surface Mount |
| Family | — | Mantis high-speed CAN |
| Modes | — | Normal, Standby |
| ESD (HBM, bus pins) | — | ±8 kV typical |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Dominant Timeout | — | Yes (built-in) |
| RoHS-Status | — | Compliant |
| MSL-Level | — | 1 |