SN65HVD21P vs SN65HVD23P Vergleich
Detaillierter Direktvergleich von SN65HVD21P von Texas Instruments und SN65HVD23P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD21P - Extended Common-Mode RS-485 Transceiver | Texas Instruments
SN65HVD21P ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD21P | SN65HVD23P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Extended common-mode RS-485 transceiver | — |
| Transceiver Configuration | 1/1 (one driver, one receiver), half duplex | 1/1 transceiver, half-duplex |
| Supported Standards | RS-485, RS-422 | — |
| Number of Transmitters | 1 | — |
| Number of Receivers | 1 | — |
| Gehäuse | PDIP (P), 8 pins | — |
| Pin-Anzahl | 8 | — |
| Montageart | Through-hole | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: supply voltage range] |
| Common-Mode Voltage Range | [DATA_NEEDED: extended common-mode voltage limits] | -20 V to 25 V |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Receiver Differential Threshold | [DATA_NEEDED: receiver input sensitivity] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: driver output levels] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent current] | — |
| Enable Pins | Driver enable (DE), receiver enable (RE) | — |
| Termination | External, not integrated | — |
| RoHS Compliance | [DATA_NEEDED: RoHS status] | — |
| Manufacturer | Texas Instruments | — |
| Product Type | — | RS-422/RS-485 transceiver |
| Maximum Signaling Rate | — | 25 Mbps |
| Standard Compliance | — | TIA/EIA-485-A |
| Bus Node Capacity | — | Up to 256 nodes |
| Bus I/O ESD Protection | — | Over 16 kV HBM |
| Receiver Equalization | — | Yes |
| Package Type | — | 8-pin PDIP (P) |
| Package Pin Count | — | 8 pins |
| Package Length | — | 9.81 mm |
| Package Width | — | 9.43 mm |
| Package Body Area | — | 92.5083 mm² |
| Montagestil | — | Through-hole PDIP |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |