SN65HVD230DR vs SN65HVD230QDRQ1 Vergleich
Detaillierter Direktvergleich von SN65HVD230DR von Texas Instruments und SN65HVD230QDRQ1 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ AktivTexas Instruments
SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments
SN65HVD230QDRQ1 ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD230DR | SN65HVD230QDRQ1 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,94 | $1,11 |
| Product Type | CAN Bus Transceiver | — |
| Number of Drivers/Receivers | 1/1 | — |
| Protocol | CANbus (ISO 11898-2) | — |
| Versorgungsspannung | 3 V to 3.6 V (3.3 V nominal) | 3.3 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Betriebstemperatur | -40C to +85C | — |
| Gehäuse | 8-SOIC (D) | 8-SOIC (D), 3.90 mm width |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | — |
| RS Pin Function | Slew-rate control via external resistor | — |
| Transceiver Type | — | CAN (Half-duplex, 1 driver / 1 receiver) |
| Datenrate | — | Up to 1 Mbps |
| Standby Mode Current | — | 370 uA (typical) |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Device ESD Rating | — | Exceeds 2000 V per MIL-STD-883 |
| Protocol Compatibility | — | ISO 11898-2 High Speed CAN Physical Layer |
| Standby Mode | — | Yes (RS pin controlled) |
| Dominant Timeout | — | Yes |
| Slew Rate Control | — | Yes (RS pin) |
| Unpowered Node Behavior | — | Does not disturb the bus |
| Betriebstemperaturbereich | — | -40C to +125C |
| AEC-Q100 Qualification | — | Qualified (Automotive Catalog) |
| Packaging | — | Tape & Reel (DR) |