SN65HVD230DR vs TJA1050 Vergleich
Detaillierter Direktvergleich von SN65HVD230DR von Texas Instruments und TJA1050 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ Aktiv
Spezifikationsvergleich
| Parameter | SN65HVD230DR | TJA1050 |
|---|---|---|
| Marke | Texas Instruments | NXP Semiconductors |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,94 | $0,84 |
| Product Type | CAN Bus Transceiver | High-speed CAN transceiver |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | CANbus (ISO 11898-2) | CAN 2.0A/B (classic CAN); controller-side interface only |
| Versorgungsspannung | 3 V to 3.6 V (3.3 V nominal) | — |
| Maximum Data Rate | 1 Mbps | 1 Mbit/s |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Betriebstemperatur | -40C to +85C | -40 C to +150 C |
| Gehäuse | 8-SOIC (D) | SOIC-8 (TJA1050T/CM,118) |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| RS Pin Function | Slew-rate control via external resistor | — |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Bus Fault Protection | — | Short to battery, short to ground, thermal shutdown |
| Quiescent Current (Recessive) | — | [DATA_NEEDED: Iq typical] |
| Standby/Mode Pin | — | Yes (S pin, silent mode) |
| Differential Bus Voltage (Dominant) | — | [DATA_NEEDED: Vdiff_dom min/max] |
| MSL-Level | — | 1 |
| Automotive Grade | — | TJA1050T/CM variant referenced; AEC-Q100 status [DATA_NEEDED] |