SN65HVD231DR vs SN65HVD230DR Vergleich
Detaillierter Direktvergleich von SN65HVD231DR von Texas Instruments und SN65HVD230DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD231DR - 3.3V 1Mbps CAN Transceiver | Texas Instruments
SN65HVD231DR ✓ AktivTexas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD231DR | SN65HVD230DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,94 |
| Product Type | 3.3 V CAN transceiver | CAN Bus Transceiver |
| Versorgungsspannung | 3 V to 3.6 V | 3 V to 3.6 V (3.3 V nominal) |
| Maximum Signaling Rate | 1 Mbps | — |
| Standard Compatibility | ISO 11898-2 high-speed CAN physical layer | — |
| Bus Nodes | Up to 120 nodes | — |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | — |
| Receiver Input Impedance | High input impedance | — |
| Low-Power Mode | Sleep mode | — |
| Gehäuse | 8-pin SOIC | 8-SOIC (D) |
| Montageart | Surface mount | Surface Mount |
| Datenrate | Up to 1 Mbps | — |
| CAN Bus Pins | CANH and CANL | — |
| Unpowered-Node Behavior | Does not disturb the bus | — |
| Driver Transition Time | Adjustable for improved signal quality | — |
| RoHS-Status | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40C to +85C |
| Ruhestrom | [DATA_NEEDED: sleep-mode and standby current specifications] | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Maximum Data Rate | — | 1 Mbps |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| RS Pin Function | — | Slew-rate control via external resistor |