SN65HVD234QDRQ1 vs SN65HVD234DR Vergleich
Detaillierter Direktvergleich von SN65HVD234QDRQ1 von Texas Instruments und SN65HVD234DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD234QDRQ1 - 3.3V Automotive CAN Transceiver | Texas Instruments
SN65HVD234QDRQ1 ✓ AktivTexas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD234QDRQ1 | SN65HVD234DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,98 | $1,30 |
| Funktion | Half CANbus Transceiver (Driver + Receiver) | — |
| Supply Voltage Min | 3 V | — |
| Supply Voltage Max | 3.6 V | — |
| Operating Supply Current | 6 mA | — |
| Datenrate | 1 Mbps | — |
| Sleep Mode | Yes (ultralow-current via EN pin, low level on pin 5) | — |
| Autobaud Loopback | Yes (internal TXD to RS pin loopback) | — |
| Automotive Qualification | AEC-Q100 (Q1) | — |
| Operating Temperature Max | +125 C | — |
| Gehäuse | 8-SOIC (D) | SOIC-8 (D) |
| Montageart | Surface Mount | Surface Mount |
| Protocol | CAN (ISO 11898 physical layer) | ISO 11898-1 CAN 2.0A/B |
| Number of Drivers / Receivers | 1 / 1 | — |
| RoHS-Status | Compliant | Compliant |
| Reel Quantity | [DATA_NEEDED: reel quantity] | — |
| Product Type | — | CAN Bus Transceiver |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Logic Supply Voltage (VIO) | — | Not required (3.3V logic) |
| Maximum Signaling Rate | — | 1 Mbps |
| Number of Drivers/Receivers | — | 1/1 |
| Bus Fault Protection | — | +/-36 V |
| ESD Protection (Bus Pins, HBM) | — | >16 kV |
| Common-Mode Input Range | — | +/-12 V (extended) |
| Maximum Nodes Supported | — | 120 |
| I/O Logic Level | — | LVTTL, 5V-tolerant |
| Sleep Mode Supply Current | — | 0.05 uA (typical) |
| Standby Mode Supply Current | — | 370 uA (typical) |
| Betriebstemperaturbereich | — | -40C to +125C |
| Modes of Operation (RS Pin) | — | High-speed, Slope Control, Low-power Standby |
| Dominant Time-Out Protection | — | Yes |
| Thermisches Abschalten | — | Yes |