SN65HVD255QDRQ1 vs SN65HVD234DR Vergleich
Detaillierter Direktvergleich von SN65HVD255QDRQ1 von Texas Instruments und SN65HVD234DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD255QDRQ1 | SN65HVD234DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,94 | $1,30 |
| Funktion | Turbo CAN Transceiver | — |
| Versorgungsspannung | 3.3 V | — |
| Datenrate | >1 Mbps (turbo mode) | — |
| Protocol | ISO 11898 compatible CAN | ISO 11898-1 CAN 2.0A/B |
| Duplex | Half-duplex | — |
| Number of Transceivers | 1 | — |
| Gehäuse | SOIC-8 (D) | SOIC-8 (D) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 Qualified | — |
| Short-Circuit Protection | Yes | — |
| Thermisches Abschalten | Yes | Yes |
| Mode Select | RS pin (slope control / high speed) | — |
| Family | SN65HVD25x Turbo CAN | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Ruhestrom | [DATA_NEEDED: quiescent current] | — |
| Bus Fault Voltage Tolerance | [DATA_NEEDED: bus fault voltage tolerance] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| Product Type | — | CAN Bus Transceiver |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Logic Supply Voltage (VIO) | — | Not required (3.3V logic) |
| Maximum Signaling Rate | — | 1 Mbps |
| Number of Drivers/Receivers | — | 1/1 |
| Bus Fault Protection | — | +/-36 V |
| ESD Protection (Bus Pins, HBM) | — | >16 kV |
| Common-Mode Input Range | — | +/-12 V (extended) |
| Maximum Nodes Supported | — | 120 |
| I/O Logic Level | — | LVTTL, 5V-tolerant |
| Sleep Mode Supply Current | — | 0.05 uA (typical) |
| Standby Mode Supply Current | — | 370 uA (typical) |
| Modes of Operation (RS Pin) | — | High-speed, Slope Control, Low-power Standby |
| Dominant Time-Out Protection | — | Yes |