SN65HVD73DGS vs MAX3485ESA+T Vergleich
Detaillierter Direktvergleich von SN65HVD73DGS von Texas Instruments und MAX3485ESA+T von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ AktivAnalog Devices
MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+T ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD73DGS | MAX3485ESA+T |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 3.6 V | — |
| Datenrate | 20 Mbps (max) | — |
| ESD Protection (Bus Pins) | 12 kV IEC 61000-4-2 contact discharge | — |
| Receiver Input Impedance | 1/8 unit load (up to 256 nodes) | — |
| Common-Mode Voltage Range | -7 V to +12 V | [DATA_NEEDED: receiver common-mode voltage range] |
| Driver Enable | Yes, active-high (DE pin) | — |
| Receiver Enable | Yes, active-low (RE pin) | — |
| Betriebstemperatur | -40 °C to +125 °C | — |
| Gehäuse | 10-VSSOP (DGS) 3.0 mm × 3.0 mm | 8-SOIC |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | 2 | — |
| RoHS-Status | Compliant | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Versorgungsspannung | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Package Dimensions | — | 3.90 mm width |
| Ordering Package | — | Tape and reel |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |