SN65HVD73DGS vs SN65HVD73DGSR Vergleich
Detaillierter Direktvergleich von SN65HVD73DGS von Texas Instruments und SN65HVD73DGSR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD73DGS - 3.3V Full-Duplex RS-485 20Mbps | Texas Instruments
SN65HVD73DGS ✓ AktivTexas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD73DGS | SN65HVD73DGSR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,85 | $1,28 |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | Full |
| Supply Voltage (VCC) | 3 V to 3.6 V | 3.0 V to 3.6 V |
| Datenrate | 20 Mbps (max) | — |
| ESD Protection (Bus Pins) | 12 kV IEC 61000-4-2 contact discharge | — |
| Receiver Input Impedance | 1/8 unit load (up to 256 nodes) | — |
| Common-Mode Voltage Range | -7 V to +12 V | [DATA_NEEDED: -7 V to +12 V typical] |
| Driver Enable | Yes, active-high (DE pin) | — |
| Receiver Enable | Yes, active-low (RE pin) | — |
| Betriebstemperatur | -40 °C to +125 °C | — |
| Gehäuse | 10-VSSOP (DGS) 3.0 mm × 3.0 mm | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |
| RoHS-Status | Compliant | Compliant |
| Part Number | — | SN65HVD73DGSR |
| Manufacturer | — | Texas Instruments |
| Product Type | — | RS-485 / RS-422 Full-Duplex Transceiver |
| Data Rate (max) | — | 20 Mbps |
| Number of Drivers / Receivers | — | 1 / 1 |
| Receiver Hysteresis | — | [DATA_NEEDED: typical receiver hysteresis in mV] |
| ESD Protection - HBM (bus pins) | — | ±30 kV |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | — | ±12 kV |
| Unit Load | — | 1/8 (up to 256 nodes) |
| Betriebstemperaturbereich | — | -40 °C to +125 °C |
| Enable Pins | — | DE (driver enable, active-high); RE (receiver enable, active-low) |