SP232ACP-L vs MAX232CSE+ Vergleich
Detaillierter Direktvergleich von SP232ACP-L von MaxLinear und MAX232CSE+ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | SP232ACP-L | MAX232CSE+ |
|---|---|---|
| Marke | MaxLinear | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-232 line driver and receiver transceiver | Dual RS-232 Transceiver |
| Driver Count | 2 drivers | — |
| Receiver Count | 2 receivers | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Nominal Supply Voltage | 5 V | — |
| Maximum Data Rate | 120 kbps under load | — |
| Gehäuse | 16-pin PDIP | 16-SOIC narrow |
| Betriebstemperaturbereich | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| ESD Protection | 2 kV | — |
| Charge-Pump Capacitor | 0.1 µF | — |
| Protocol Compliance | EIA/TIA-232 and V.28 | — |
| RS-232 Standards Compatibility | RS-232D | — |
| Logic Compatibility | Pin-to-pin compatible with popular industry-standard pinouts | — |
| Montagestil | Through-hole PDIP | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Interface Standard | — | EIA/TIA-232E, V.28, V.24 |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Transceiver Configuration | — | 2/2 Full RS-232 |
| Pin-Anzahl | — | 16 pins |
| Montageart | — | Surface mount |
| Technology | — | CMOS |
| Charge Pump | — | On-chip voltage converter |
| Supply Polarity | — | Single positive supply |
| Operating Temperature Grade | — | [DATA_NEEDED: commercial or industrial temperature grade] |
| Driver Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |