STM32F105RCT7 vs STM32F105RCT6 Vergleich

Detaillierter Direktvergleich von STM32F105RCT7 von STMicroelectronics und STM32F105RCT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

STMicroelectronics
STM32F105RCT7 STM32F105RCT7 - 72MHz Cortex-M3 MCU with 256KB Flash | ST

STM32F105RCT7 - 72MHz Cortex-M3 MCU with 256KB Flash | ST

STM32F105RCT7 ✓ Aktiv

Spezifikationsvergleich

Parameter STM32F105RCT7 STM32F105RCT6
Marke STMicroelectronics STMicroelectronics
Kategorie Microcontrollers Microcontrollers
Lebenszyklusstatus Aktiv Aktiv
Product Type 32-bit RISC microcontroller —
Processor Core ARM Cortex-M3 —
Maximale Taktfrequenz 72 MHz —
Flash Memory 256 KB 256 KB
Flash Organization 256K x 8 bits —
SRAM 64 KB 64 KB
Gehäuse 64-LQFP, 10 x 10 mm 64-pin LQFP
Montageart Surface mount Surface Mount
USB Interface USB OTG FS —
Ethernet Support Ethernet MAC —
CAN Controllers 2 —
ADC Converters 2 —
Timers 10 4 x 16-bit general, 1 x 16-bit advanced, 2 x watchdog
Communication Interfaces 14 —
Operating Voltage Range [DATA_NEEDED: operating voltage range] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] -40 C to +85 C (grade 6)
GPIO Count [DATA_NEEDED: GPIO count] —
RoHS-Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Core Architecture — ARM Cortex-M3 32-bit RISC
Maximum CPU Frequency — 72 MHz
CoreMark / DMIPS — 90 DMIPS (1.25 DMIPS/MHz)
Operating Voltage — 2.0 V to 3.6 V
CAN Interfaces — 2 x CAN 2.0B (1 Mbit/s)
USB — USB OTG Full-Speed with on-chip PHY
Ethernet — Not available on F105 (use F107 variant)
ADC — 2 x 12-bit, up to 1 MSPS
DMA Channels — 7-channel DMA
I/O Count (approx.) — 51 GPIO
Communication Peripherals — 5x USART, 3x SPI, 2x I2C, 2x CAN, USB OTG
RoHS Compliance — Compliant

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern