STM32F207VCT6 vs STM32F107VCT6 Vergleich
Detaillierter Direktvergleich von STM32F207VCT6 von STMicroelectronics und STM32F107VCT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F207VCT6 - 32-bit ARM Cortex-M3 MCU, 256KB Flash | STMicroelectronics
STM32F207VCT6 ✓ AktivSTMicroelectronics
STM32F107VCT6 - 256KB Flash 72MHz Cortex-M3 MCU | STMicroelectronics
STM32F107VCT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F207VCT6 | STM32F107VCT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,32 | $6,95 |
| Core | ARM Cortex-M3 | — |
| Max Clock Speed | 120 MHz | — |
| Flash Memory | 256 KB | 256 KB (256K x 8) |
| SRAM | 128 KB | 64 KB |
| Versorgungsspannung | 1.8 V to 3.6 V | — |
| Gehäuse | LQFP-100 (14x14 mm) | 100-pin LQFP (14x14 mm) |
| Betriebstemperatur | -40C to +85C | — |
| GPIO Pins | 82 | — |
| ADC | 3x 12-bit, up to 24 channels | 2 x 12-bit, up to 16 channels |
| DAC | 2x 12-bit | — |
| Timers | 12 (including advanced-control) | 10 timers (general-purpose + PWM) |
| Communication Interfaces | 3x SPI, 3x I2C, 4x USART, 2x UART, 2x CAN, USB OTG FS/HS, Ethernet MAC, SDIO | — |
| Cryptographic Acceleration | AES, DES, SHA-1, MD5 | — |
| Random Number Generator | Yes (RNG) | — |
| RoHS-Status | Compliant | Compliant |
| Core Architecture | — | ARM Cortex-M3 32-bit RISC |
| Maximale Taktfrequenz | — | 72 MHz |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Betriebstemperaturbereich | — | -40 C to +85 C |
| Montageart | — | Surface Mount |
| Ethernet MAC | — | 10/100 Mbps with dedicated DMA |
| USB Interface | — | USB 2.0 OTG full-speed (on-chip PHY) |
| CAN Controllers | — | 2 x CAN 2.0B |
| USART / UART | — | 5 USARTs |
| SPI | — | 3 SPIs |
| I2C | — | 2 I2Cs |
| Debug Interface | — | JTAG and SWD |
| Low-Power Modes | — | Sleep, Stop, Standby |
| MSL-Level | — | [DATA_NEEDED: MSL level] |