STM32F415VGT6 vs STM32F427VGT6 Vergleich
Detaillierter Direktvergleich von STM32F415VGT6 von STMicroelectronics und STM32F427VGT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F415VGT6 - 168MHz ARM Cortex-M4F MCU, 1MB Flash | STMicroelectronics
STM32F415VGT6 ✓ AktivSTMicroelectronics
STM32F427VGT6 - 180MHz Cortex-M4 MCU 1MB Flash LQFP-100 | STMicroelectronics
STM32F427VGT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F415VGT6 | STM32F427VGT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,50 | $8,95 |
| Core Architecture | ARM Cortex-M4F with FPU and DSP | ARM 32-bit Cortex-M4 with FPU and DSP |
| Maximale Taktfrequenz | 168 MHz | 180 MHz |
| DMIPS | 210 DMIPS (1.25 DMIPS/MHz) | — |
| Flash Memory | 1 MB | — |
| SRAM | 192 KB | 256 KB (192 KB + 64 KB CCM) |
| Operating Voltage | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| I/O Pins | 82 | — |
| Gehäuse | LQFP-100 (14x14 mm) | 100-pin LQFP (14x14 mm) |
| ADC | 3 x 12-bit, 2.4 MSPS | 3 x 12-bit, 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| Timers | 12 (general-purpose, advanced-control, basic, low-power) | Up to 17 (including 32-bit) |
| Communication | USB OTG FS+HS, 2x CAN, SDIO, 6x USART, 3x SPI, 2x I2C | — |
| Cryptographic Accelerator | AES 128/256, DES/Triple-DES, SHA-1, MD5, TRNG | — |
| Betriebstemperatur | -40C to +85C (industrial grade 6) | — |
| External Memory Bus | FSMC (SRAM/NOR/NAND) | — |
| Process Technology | 90 nm CMOS | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | 3 (168 hours) | 3 (JEDEC J-STD-020) |
| Montageart | Surface Mount | Surface Mount |
| Performance | — | 225 DMIPS / 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Flash Memory | — | 1 MB (1M x 8) |
| Supply Voltage (VDD/VDDA) | — | 2.0 V to 3.6 V (full performance); 1.8 V min |
| Betriebstemperaturbereich | — | -40C to +85C (grade 6) |
| ART Accelerator | — | Yes - 0-wait-state Flash execution |
| Communication Interfaces | — | USB OTG FS + HS PHY, 2x CAN 2.0B, Ethernet MAC, 6x USART/UART, 3x SPI, 4x I2C, 2x I2S, SDIO |
| Cryptography | — | AES 128/256, SHA-1/SHA-2, TRNG, hash |
| Display Controller | — | LCD-TFT (F427 line) |
| GPIO | — | Up to 114 (82 in LQFP-100) |