STM32F427IIT6 vs STM32F427VIT6 Vergleich
Detaillierter Direktvergleich von STM32F427IIT6 von STMicroelectronics und STM32F427VIT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics
STM32F427IIT6 ✓ AktivSTMicroelectronics
STM32F427VIT6 - 180MHz Cortex-M4 MCU 2MB Flash LQFP-100 | ST
STM32F427VIT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F427IIT6 | STM32F427VIT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $11,20 | $10,50 |
| Core Architecture | ARM Cortex-M4 with FPU and DSP instructions | ARM Cortex-M4 with single-precision FPU |
| Maximum CPU Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 2 MB | 2 MB (2M x 8) |
| SRAM | 256 KB (plus 4 KB backup SRAM) | 256 KB |
| Operating Voltage | 1.8 V to 3.6 V | — |
| Gehäuse | 176-pin LQFP (24 x 24 mm, 0.5 mm pitch) | LQFP-100 (14 x 14 mm, 0.5 mm pitch) |
| Betriebstemperaturbereich | -40C to +85C (industrial grade) | — |
| ADC | 3 x 12-bit, 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| USB | USB 2.0 OTG FS + USB 2.0 OTG HS (with on-chip PHY) | — |
| Ethernet | 10/100 MAC with IEEE 1588v2 hardware time-stamping | — |
| Timers | Up to 17 (including motor-control timers) | — |
| Communication Peripherals | UART/USART, SPI, I2C, CAN 2.0B, SAI, SDMMC | — |
| Graphics Accelerator | Chrom-ART (for TFT LCD) | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | Yes - 0-wait-state Flash execution |
| Montageart | Surface Mount (LQFP-176) | Surface Mount (SMD/SMT) |
| RoHS-Status | Compliant | Compliant |
| Maximale Taktfrequenz | — | 180 MHz |
| Performance | — | 225 DMIPS / 3.92 CoreMark/MHz (Dhrystone 2.1) |
| DSP Instructions | — | Full ARM DSP instruction set |
| GPIO Pins | — | 82 |
| Operating Voltage (VDD) | — | 1.8 V to 3.6 V |
| Betriebstemperatur | — | -40 C to +85 C (industrial grade, VIT6 suffix) |
| Communication Interfaces | — | 3 x USART/UART, 4 x SPI, 3 x I2C, 2 x CAN 2.0B, USB OTG FS + HS, Ethernet MAC, SDIO |
| Cryptographic Accelerator | — | AES, DES, SHA, HMAC, TRNG |
| Chrom-ART Accelerator | — | Yes - 2D graphics DMA |
| TFT-LCD Controller | — | Yes (parallel RGB interface) |