STM32F427IIT6 vs STM32F429BIT6 Vergleich
Detaillierter Direktvergleich von STM32F427IIT6 von STMicroelectronics und STM32F429BIT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F427IIT6 - ARM Cortex-M4 MCU 180MHz 2MB Flash LQFP-176 | STMicroelectronics
STM32F427IIT6 ✓ AktivSTMicroelectronics
STM32F429BIT6 - 180MHz ARM Cortex-M4 MCU 2MB Flash LQFP-208 | STMicroelectronics
STM32F429BIT6 ✓ AktivSpezifikationsvergleich
| Parameter | STM32F427IIT6 | STM32F429BIT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $11,20 | $11,05 |
| Core Architecture | ARM Cortex-M4 with FPU and DSP instructions | — |
| Maximum CPU Frequency | 180 MHz | — |
| DMIPS Performance | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) | — |
| Flash Memory | 2 MB | 2 MB (dual-bank) |
| SRAM | 256 KB (plus 4 KB backup SRAM) | 256 KB system + 4 KB backup |
| Operating Voltage | 1.8 V to 3.6 V | 2.0 V to 3.6 V |
| Gehäuse | 176-pin LQFP (24 x 24 mm, 0.5 mm pitch) | LQFP-208 (28x28 mm) |
| Betriebstemperaturbereich | -40C to +85C (industrial grade) | — |
| ADC | 3 x 12-bit, 2.4 MSPS | 3 x 12-bit, up to 2.4 MSPS |
| DAC | 2 x 12-bit | 2 x 12-bit |
| USB | USB 2.0 OTG FS + USB 2.0 OTG HS (with on-chip PHY) | — |
| Ethernet | 10/100 MAC with IEEE 1588v2 hardware time-stamping | — |
| Timers | Up to 17 (including motor-control timers) | 17 (including 12-bit PWM, low-power) |
| Communication Peripherals | UART/USART, SPI, I2C, CAN 2.0B, SAI, SDMMC | — |
| Graphics Accelerator | Chrom-ART (for TFT LCD) | — |
| ART Accelerator | Yes (0-wait-state Flash execution) | — |
| Montageart | Surface Mount (LQFP-176) | Surface Mount (LQFP) |
| RoHS-Status | Compliant | Compliant |
| Core | — | ARM 32-bit Cortex-M4 with FPU |
| Maximale Taktfrequenz | — | 180 MHz |
| DMIPS | — | 225 DMIPS (1.25 DMIPS/MHz, Dhrystone 2.1) |
| I/O Voltage Tolerance | — | 5 V tolerant (most I/Os) |
| Communication Interfaces | — | USB OTG HS/FS, Ethernet MAC, 6x USART/UART, 4x SPI, 3x I2C, 2x CAN |
| Graphics | — | Chrom-ART Accelerator, LCD-TFT parallel interface |
| Betriebstemperatur | — | -40 C to +85 C (industrial grade 6) |
| MSL-Level | — | MSL 3 |