STM32F437VIT6 vs STM32F429VIT6 Vergleich
Detaillierter Direktvergleich von STM32F437VIT6 von STMicroelectronics und STM32F429VIT6 von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
STM32F437VIT6 - 2MB Flash, 180MHz ARM Cortex-M4 MCU | STMicroelectronics
STM32F437VIT6 ✓ AktivSTMicroelectronics
STM32F429VIT6 - 180MHz Cortex-M4 2MB MCU | STMicroelectronics
STM32F429VIT6 UnknownSpezifikationsvergleich
| Parameter | STM32F437VIT6 | STM32F429VIT6 |
|---|---|---|
| Marke | STMicroelectronics | STMicroelectronics |
| Kategorie | Microcontrollers | Microcontrollers |
| Lebenszyklusstatus | Aktiv | Unknown |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Maximale Taktfrequenz | 180 MHz | — |
| Flash Memory | 2 MB | 2 MB |
| SRAM | 256 KB | — |
| Versorgungsspannung | 1.8 V to 3.6 V | — |
| Gehäuse | LQFP100 (14x14 mm, 0.5 mm pitch) | 100-pin LQFP, 14 x 14 mm |
| Betriebstemperatur | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| GPIO Pins | 82 | — |
| ADC | 3x 12-bit, 2.4 MSPS | — |
| DAC | 2x 12-bit | — |
| Timers | 12x 16-bit, 2x 32-bit | — |
| Communication Interfaces | USB 2.0 OTG HS/FS, Ethernet MAC, CAN 2.0B, SPI, I2C, USART, SDIO | — |
| Cryptographic Acceleration | AES, DES, SHA-1, SHA-2 | — |
| TFT LCD Controller | Up to XGA resolution | — |
| DMA | 2x DMA controllers with 16 streams each | — |
| RTC | Yes, with calendar and alarm | — |
| Low Power Modes | Sleep, Stop, Standby | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | 32-bit ARM Cortex-M4 microcontroller |
| Maximum CPU Frequency | — | 180 MHz |
| Flash Organization | — | 2M x 8 bits |
| System SRAM | — | 256 KB |
| Backup SRAM | — | 4 KB |
| Performance | — | 225 DMIPS |
| Performance per Frequency | — | 1.25 DMIPS/MHz |
| Architecture | — | 32-bit RISC |
| Floating-Point Support | — | Single-precision FPU |
| DSP Instructions | — | Supported |
| Memory Protection Unit | — | Supported |
| Flash Accelerator | — | ART Accelerator, zero-wait-state execution |
| Montageart | — | Surface mount |
| Nominal Supply | — | 2.5 V or 3.3 V |
| LCD Interface | — | Parallel LCD interface |
| REACH Status | — | [DATA_NEEDED: REACH status] |